Enter the address of the property you’re considering into the GIS Map Tool here. Click “Search” and type in your address, then hit search again. (You must format your search like this, "444 SW 2 ave").
NOTE: If you need help with the GIS tool, click here.
Once the property is generated, Click the “zoning” tab. You will see the “zone” column (this is also referred to as your transect zone) and is labeled as T4-L, C-CI, D-D1, etc.
TIP: If there are numbers in between the letter names of your zone, you can disregard those for now.
NOTE: Be sure to also look at the “Areas of Specific Designation” Box underneath. If this box says “SD” (special district), this means you are required to get a class II special permit, which supersedes a warrant and should be attended to first (i.e. apply for the class II, not the Warrant). If your zone says SD and your usage requires an exception (see below), you must apply for the Exception permit, and simply note "Class II" on that application.
Click on your transect zone (in the box that says zone), and you will be routed to a portion of Miami21 that details what can and cannot be done in this zone.
Scroll down to “Article 4, Table 3” within this document to find a spreadsheet of building functions and uses.
View the column for your transect, then match that column with the row for your desired usage (i.e. T4-L and Lodging-Inn or D1 and Commercial-Open Air Retail) and you will see one of four options:
- “R”: If there is an R in the box, that means this usage is allowed by right in this zone.
- “W”: If there is a W in the box, that means this usage is allowed only by warrant , which is a permit that you will need to apply for.
- “E”: If there is an E in the box, this usage is allowed only by exception , which is a permit you will need to apply for. An exception requires a hearing and is granted by the PZAB (Planning, Zoning, & Appeals Board).
- Blank: If the box is blank, that means this usage is prohibited in this transect.
Click here for definitions (section 1.2) and explanations of all functions/uses listed in this table.
If you have determined that a warrant or exception is necessary for your location + function/usage, follow the steps for these processes.
Apply for a Warrant
Apply for an Exception
NOTE: It is possible that your usage falls into multiple categories and that you may need a warrant and an exception (i.e. a food service establishment allowed by exception may also need an outdoor dining warrant). In that case, apply for the exception, specify any warrants which may also be necessary, and the warrant will travel with the exception application.
NOTE: Before applying for your warrant or exception, you may also need waivers . Click here to find out and/or view the waiver process. If you are applying for a warrant or exception, your waivers will travel with that application.
NOTE: Warrants and Exceptions have time-lines. If approved, you will have a specific time-frame in which to complete all other permits, permissions & certificates needed.